Secunderabad, Telangana, India
Send Message [email protected]
Helpline +91 970 430 9380
Internal Fixation for Fractures
The implants used for internal fixation are made from stainless steel and titanium, which are durable and strong. If a joint is to be replaced, rather than fixed, these implants can also be made of cobalt and chrome. Implants are compatible with the body and rarely cause an allergic reaction.
Plates are like internal splints that hold the broken pieces of bone together. They are attached to the bone with screws. Plates may be left in place after healing is complete, or they may be removed (in select cases).
In this x-ray, broken bones in a forearm are held in position with plates and screws while they heal.
Screws are used for internal fixation more often than any other type of implant. Although the screw is a simple device, there are different designs based on the type of fracture and how the screw will be used. Screws come in different sizes for use with bones of different sizes. Screws can be used alone to hold a fracture, as well as with plates, rods, or nails. After the bone heals, screws may be either left in place or removed.
A broken bone in this patient’s ankle is held in position with plates and screws.
In some fractures of the long bones the best way to hold the bone pieces together is by inserting a rod or nail through the hollow center of the bone that normally contains some marrow. Screws at each end of the rod are used to keep the fracture from shortening or rotating, and also hold the rod in place until the fracture has healed. Rods and screws may be left in the bone after healing is complete. This is the method used to treat the majority of fractures in the femur (thighbone) and tibia (shinbone).
This x-ray shows a healed shinbone fracture treated with intramedullary nailing.
Wires are often used to pin the bones back together. They are often used to hold together pieces of bone that are too small to be fixed with screws. In many cases, they are used in conjunction with other forms of internal fixation, but they can be used alone to treat fractures of small bones, such as those found in the hand or foot. Wires are usually removed after a certain amount of time, but may be left in permanently for some fractures.
This x-ray shows a child’s elbow fracture that has been put into the correct position and held in place with two pins. The pins will be removed after healing has begun.
An external fixator acts as a stabilizing frame to hold the broken bones in proper position. In an external fixator, metal pins or screws are placed into the bone through small incisions into the skin and muscle. The pins and screws are attached to a bar outside the skin. Because pins are inserted into bone, external fixators differ from casts and splints which rely solely on external support.
External fixation is often used to hold the bones together temporarily when the skin and muscles have been injured.
In many cases, external fixation is used as a temporary treatment for fractures. Because they are easily applied, external fixators are often put on when a patient has multiple injuries and is not yet ready for a longer surgery to fix the fracture. An external fixator provides good, temporary stability until the patient is healthy enough for the final surgery.
Other times, an external fixator can be used as the device to stabilize the bone until healing is complete.
This patient’s fractured thighbone has been stabilized with external fixation. The fixator will be removed when surgery to repair the fracture can be performed safely.
There may be some inflammation or, less commonly, infection associated with the use of external fixators. This is typically managed with wound care and/or oral antibiotics.
Sterile conditions and advances in surgical techniques reduce, but do not remove, the risk of infection when internal fixation is used. The severity of the fracture, its location, and the medical status of the patient must all be considered.
In addition, no technique is foolproof. The fracture may not heal properly or the plate or rod may break or deform. Although some media attention has focused on the possibility that cancer could develop near a long-term implant, there is little evidence documenting an actual cancer risk and much evidence against that possibility. Orthopaedic surgeons are continuing their research to develop improved methods for treating fractures.